Plastic Magnetic Drive Acid Resistance Circulation Pump /Centrifugal Water Pump

Description

MP 20 RX  Plastic Magnetic Drive Acid Resistance Circulation Pump / Sea Water Pump/Centrifugal Water Pump  220V 60HZ
Introduction:
1. MP magnetic pump is manufactured by RONDA is compact structure, small volume, light weight.
2. Pump is widely used in all industries works as booster pump, chemical, lab pump, circulation pump.
3. Pump is designed with 50 or 60Hz to meet requirements of clients from different countries.
4. Pump is generally designed for no shaft seal, completely avoids defects of pollution after corrosion caused by liquid leakage, which exists in traditional mechanical shaft seal pump, it is the optimum liquid transport pump.
5.Normal operating temperature is 0-80°C. If the higher operating environments is required, please consult with us.
PARAMETER DATA:
ins
tallation and operat
i
on of magnetic pump
1. Magnetic pump should be horizontally installed, but not upright. Plastic pump is not able to endure the weight of pipeline. In case of special occasions requiring upright installation, motor should be kept upward.
2. When liquid level is higher than the centerline of pump, turn on the valve of intake pipe before start; when liquid level is lower than the centerline, a bottom valve should be fitted to the pipeline.
3. Check before operation to make sure that motor rotates flexibly without jamming and abnormal sound, and that all fasteners are not loosened.
4. Check whether motor rotor in accordance with the direction sign.
5. After motor is started, slowly turn on discharge valve, when pump enters normal working state, adjust the discharge valve to the requiring opening.
6. Before pump stops working, turn off discharge valve first, and then the valve of intake pipe.