YAMAHA MT-10 MT-09 FZ-10 FZ-09 FRONT LOWERING STRAP BRACKETS BOLTS SPACER KIT

Description

MOTORCYCLE SUSPENSION LIMIT
FRONTEND LOWERING STRAP AND RADIALLY MOUNTED CALIPER BRACKETS
FAST 1-3 DAY USPS PRIORITY MAIL INCLUDED!!!
(APPLIES TO U.S STATES ONLY)
THIS KIT HELPS ELIMINATE WHEELIES DURING LAUNCH FOR LOWER 60' AND QUICKER E.T'S.
STRAP SPECS:
1" PRESS RELEASE CAM BUCKLE
PRE DRILLED BOLT PLATES AT THE ENDS
4.5' OVERALL LENGTH
6500LB. TEST NYLON WEBBING
2180LB. RATED CAM-BUCKLE
IF YOU ARE UNSURE, MEASURE FIRST. SOME BIKES HAVE 100mm CALIPERS. THIS KIT WILL NOT FIT THOSE BIKES.
!!!
THESE ARE 108mm (4.25") CALIPER BRACKETS!
!!
(
see attached pic on how to measure your caliper to be sure your calipers measure the same
)
MOUNTING BRACKETS SPECS:
Anodized black finish radial mount caliper bracket kit .
This is a fast easy way to lower your bike on the street or at the track to provide for more level ride height. At the track these are used to adjust the front end height to control weight transfer during launching.
These are the brackets that you have to use with Radially Mounted Brake Calipers to attach the front end lowering straps.
CNC Machine from 6061 Billet Aluminum and provided with stainless steel corrosion free hardware.
SIMPLE UNIVERSAL INSTALL:
JUST BOLT ONE END OF THE STRAP TO THE TOP LEFT FRONT BRAKE CALIPER BOLT. RUN THE STRAP UP AND OVER THE NECK OF THE FRAME (BETWEEN TOP OF GAS TANK AND TRIPLE TREE) AND DOWN TO THE TOP RIGHT CALIPER MOUNTING BOLT. TIGHTEN CALIPER MOUNTING BOLTS TO FACTORY TORQUE SPECS. TORQUE STRAP TO BRACKET AT 15ft/lbs (non-permanaent RED loctite is recommened). COMPRESS THE FRONT SUSPENSION WHILE PULLING ON THE STRAP HANDLE(THIS WILL KEEP YOUR SUSPENSION COMPRESSED AND HELP KEEP YOUR FRONT END FROM COMING UP DURING HARD LAUNCHES). WHEN YOU ARE DONE RACING, SIMPLY PRESS THE LEVER ON THE CAM BUCKLE AND YOU WILL NOW BE BACK TO STOCK RIDE HEIGHT. NO NEED TO REMOVE THIS FROM THE BIKE COMPLETELY (UNLESS YOU WANT TO) THIS WAY IT IS ALWAYS THERE READY FOR ACTION.
*It is the buyer’s responsibility to research fitment of these straps on his or her application. Some newer bikes may require additional hardware or modifications to make work. If you are unsure then we advise you to search internet forums, chat rooms, visit your local drag strip etc. to find out for sure. The bike manufactures make small changes from year to year and it is practically impossible for us to keep up with all of them.
THIS LISTING IS FOR A BLACK LOWERING STRAP AND A PAIR OF MOUNTING BRACKETS.
YAMAHA MT-09 FZ-09 MT-10 FZ-10
MOTORCYCLE SUSPENSION LIMIT FRONTEND LOWERING STRAPS,
RADIAL BRAKE CALIPER MOUNTING BRACKETS, SPACERS AND LONGER BOLTS.
PROUDLY MADE IN THE USA!!!
!!!!!!! THESE ARE 108mm (4.25") CALIPER BRACKETS
(SEE ATTACHED PIC ON HOW TO MEASURE)
WILL NOT FIT 100mm BREMBO BRAKE SYSTEMS!!!!!!!
KIT INCLUDES:
1-STRAP
2-CALIPER MOUNTING BRACKETS
4-SPACERS
4-LONGER BOLTS
FREE 1-3 DAY USPS PRIORITY SHIPPING INCLUDED!!!
NHRA IHRA XDA CMDRA WMDRA PMRA NHDRO AMRA ADRL AHDRA MANCUP APPROVED!!!!
THESE STRAPS CAN REMAIN ON YOUR MOTORCYCLE WHEN DONE RACING. JUST A PUSH OF THE CAMBUCKLE LEVER AND YOUR BIKE WILL RETURN TO ITS NATURAL RIDE HEIGHT. NOW YOU CAN CRUISE AROUND WITHOUT DISRUPTING HANDLING OR STEERING. THEN WHEN THE TIME COMES, JUST A PUSH DOWN ON FRONT SUSPENSION WHILE PULLING THE STRAP HANDLE AND....BAM!! YOU ARE NOW ARMED AND READY TO TAKE CARE OF THAT LATE NIGHT "SITUATION" THAT NEEDS SOME ATTENTION.
THESE STRAPS HELP KEEP THAT FRONTEND PLANTED FOR LOWER 60' AND QUICKER E.T'S.
EACH 1” LOWER EQUATES TO 1 TENTH QUICKER E.T!
THEY WORK BY PRELOADING THE FRONT END TO PREVENT THE "HAMMER" EFFECT WHICH OCCURS WHEN LAUNCHING HARD.
STRAP SPECS:
1" PRESS RELEASE CAM BUCKLE
PRE DRILLED BOLT PLATES AT THE ENDS
4.5' OVERALL LENGTH
5400 LB. TEST NYLON WEBBING
2180 LB. RATED CAM-BUCKLE
RADIAL BRAKE CALIPER MOUNTING BRACKETS SPECS:
CNC LIGHTWEIGHT AEROSPACE BILLET 6061 ALUMINUM.
Anodized black finish radial mount caliper bracket kit .
This is a fast easy way to lower your bike on the street or at the track to provide for more level ride height. At the track these are used to adjust the front end height to control weight transfer during launching.
These are the brackets that you have to use with Radially Mounted Brake Calipers to attach the front end lowering straps.
SIMPLE UNIVERSAL INSTALL:
Begin by removing top and bottom brake caliper mounting bolts.
Re-insert the bolts through the Radial Mount Strap Brackets with the notched area facing toward the brake caliper.
Torque bolts to 29 FT/LBS and repeat on the opposite side.
Always route strap UNDER any cables and wires to prevent pinching or damage.
Do not allow strap to twist. Route strap upward over steering neck, and down the other side.
Attach the remaining end of strap and Tighten strap slightly to remove slack.
Torque bolts on both sides to 15 FT/LBS.
WHEN YOU ARE DONE RACING, SIMPLY PRESS THE LEVER ON THE CAM BUCKLE AND YOU WILL NOW BE BACK TO STOCK RIDE HEIGHT. NO NEED TO REMOVE THIS FROM THE BIKE COMPLETELY (UNLESS YOU WANT TO) THIS WAY IT IS ALWAYS THERE READY FOR ACTION.
*It is the buyer’s responsibility to research fitment of these straps on his or her application. Some newer bikes may require additional hardware or modifications to make work. If you are unsure then we advise you to search internet forums, chat rooms, visit your local drag strip etc. to find out for sure. The bike manufactures make small changes from year to year and it is practically impossible for us to keep up with all of them.
NO warranty expressed written or implied.
THIS LISTING IS FOR A BLACK STRAP, MOUNTING BRACKETS, SPACERS AND BOLTS.
THANK YOU FOR LOOKING AND WE HOPE TO HAVE YOU AS ANOTHER SATISFIED CUSTOMER.
ALL returns must be shipped USPS Priority at your expense (which is non-refundable) you will also be subjected to a 30% restocking fee. By purchasing this item you are accepting these terms. NO EXCEPTIONS!!!